Hydracore Drills Ltd.
      We manufacture lightweight drills and drilling equipment for mineral exploration   
   >>>home<<<
Contact us
Drills  & Specifications

 

HYDRACORE    PACK DRILL

 

Pictured is the Hydracore Pack Drill with hydraulic feed frame 68" stroke and Honda 20HP engine. This unit drilled to 93 feet of ATW wireline at this site in 7 hours. Only 6 gallons of gas was used in the drill and the two water pumps. This drill is very light when considering its capacity. Everything required to drill to 200 feet will fit in a half ton truck.

wpe5D.jpg (169774 bytes)wpe61.jpg (94428 bytes) HYDRACORE    PACK DRILL

SPECIFICATIONS

* Power Options  

- 13 HP Honda single cylinder pull start
- 20 HP Honda V twin electric
- Kohler 22 HP or 25 HP V twin electric start. 
    

* Drill Head    

- Maximum Spindle Speed  - 1400 RPM with 1.3 in/rev Motor
- other speeds from 400-1600 optional
- Type   -   Top Drive Built in water swivel
- Spindle Connection     -  AW, AWJ,ARQTK or EW

    
* Hydraulic Pumps             
                                        Head                       Feed
- Type                       Gear Pump                   Gear Pump
- Volume                   .488in/Rev                 .071in/Rev     
- Relief  Pressure    3000 P.S.I.                2500 P.S.I.

* Feed      

- Length  - 40" or  68"
- Max Thrust   - 2400 lbs. At 2500 P.S.I.
- Max Pull        - 4400 lbs. At 2500 P.S.I.
   

* Hydraulic Reservoir
- Capacity - 2 Gallons
      >>>With built in heat exchanger.

*Optional Equipment

- Alternative Motors   - 400 R.P.M. to 1600 R.P.M.
- Water Pumps           - 4.6 or 13 GPM capacity
- Wireline winch       - 300 foot capacity
    

*Depth Capacities 

- With 13HP engine- IEWS 200 feet
- AW or ATW not recommended
- With V twin engine   - AW or ATW 200 feet.

    
*Weights   

- Powerpack 13HP   - 130 lbs
- Powerpack 20HP       - 170 lbs
- Drill   - 155 lbs
- Winch with cable     - 40 lbs