Hydracore Drills Ltd.
      We manufacture lightweight drills and drilling equipment for mineral exploration   
   >>>home<<<
Contact us
Drills  & Specifications

 

HYDRACORE  GOPHER SURFACE

 

wpe60.jpg (62320 bytes) HYDRACORE   GOPHER SURFACE

SPECIFICATIONS

* Power

-42 HP Kubota 4 Cylinder Diesel Turbo V1505T

-34 HP Vanguard 3 Cylinder Turbo Diesel

-57 HP Kubota 4 Cylinder Diesel Turbo V2203T

                                                                                                                                       

* Drill Head       

- Maximum Spindle Speed: - 950 RPM Cessna 5.04

- Type: Top Drive

- Spindle Connection: - AW, AWJ or AQ or BQTK, BTQ BQ     

(BQ hydraulic chuck also avaible in place of top drive head )

                                                                                         

* Hydraulic Pumps    

                                  Feed Cylinder                    Head                                       Water Pump

-Type   Triple Gear Pump
-Volume    .061 in/Rev 1.3, 1.6, or 2.3 in/Rev   .244 in3/Rev
-Relief Pressure 2500 P.S.I. 2500 P.S.I. 3000 P.S.I.

 

 

 

 

* Feed                                                                              

-Feed Length - 67"  With 2" Feed Cylinder;

- Max Thrust: 4140 lbs. At 2500 P.S.I.

- Max Pull: 7850 lbs. At 2500 P.S.I.

-Feed Length - 67"  With 2.5 " Feed Cylinder;

-Max Thrust: 4140 lbs. At 6000 P.S.I.

- Max Pull: 7850 lbs. At 12000 P.S.I.                                                                                                        

* Hydraulic Reservoir Capacity

- 5 Gallons                                                 

* Weights          

-Power Pack 40 HP 600 Lbs

* Optional Equipment               

- Casing Motor: 350 R.P.M. or 560 R.P.M.                                        

- Water Pumps: -Hudralic powered 10 or 20 G.P.M. Capacity

-Wire line Winch 1000" Capacity

-Hydraulic Foot Clamp

Supply pumps Diesil or gas 10 or 20 GPM

                                                           

 

 

 

 

HYDRACORE DRILLS LTD.

 

 

 

GOPHER DRILL SPECIFICATIONS

 

 

 

 

Power 42 HP Kubota 4 Cylinder Diesel Turbo V1505T

34 HP Vanguard 3 Cylinder Turbo Diesel

 

57 HP Kubota 4 Cylinder Diesel Turbo V2203T

 

 

 

Drill Head Maximum Spindle Speed - 950 RPM Cessna 5.04

Type - Top Drive

Spindle Connection - AW, AWJ or AQ or BQTK, BTQ BQ

( BQ hydraulic chuck also available in place of top drive head)

 

 

 

Hydraulic Pumps Feed Cylinder Head Water Pump

Type Triple Gear Pump

Volume .061 in/Rev 1.3, 1.6, or 2.3 in/Rev .244 in3/Rev

Relief Pressure 2500 P.S.I. 2500 P.S.I. 3000 P.S.I.

 

 

With 2" Feed Cylinder With 2.5" Feed Cylinder

Feed Length - 67"

Max Thrust - 4,140 lbs. At 2500 P.S.I. 6,000 LBS

Max Pull - 7,850 lbs. At 2500 P.S.I. 12,000 LBS

 

 

 

Hydraulic Reservoir Capacity – 5 Gallons

Weights Power Pack 40 HP 600 Lbs

 

Drill with

Optional Equipment Casing Motor – 350 R.P.M. or 560 R.P.M.

Water Pumps – Hydraulic powered 10 or 20

G.P.M.Capacity

Wire Line Winch 1000’ Capacity

 

Hydraulic Foot Clamp

Supply pumps Diesel or gas 10 or 20 GPM