SPECIFICATIONS

* Power 
- 75HP 600 Volt T.E.F.C. MOTOR 

* Drill Head Type

- Poly chain Drive 
- Longyear Hydraulic Chuck
- 2 Hydraulic Motors High and Low Speed
- Max. rod size:               HQ or NQ  (Depending on head.) 
- High speed Mode:             0-1600 Rpm    
        Full Horsepower From:        1000-1600RPM 
        Maximum torque:              330 ft-lbs 
- low Speed Mode:              0-150 Rpm 
        Maximum Torque:              1000 ft-lbs

* Hydraulic Pumps
                              

                             Type            Volume      Relief Pressure
      

- Slow Feed, Clamps     Pressure Compensated    0.913 in3/Rev      2500 P.S.I.
        and Chuck
     

- Head, Fast Feed       Load Sensing            4.25  in3/Rev      5000 P.S.I.
        and Winch
     

- Pump and Mud Mixer    Load Sensing           2.78  in3/Rev      2500 P.S.I. 

* Feed 
- Length:         60" 
- Max Thrust:     12,250lbs @ 3000 P.S.I. 
- Max Pull:       12,250lbs @ 3000 P.S.I. 

* Depth Capacity 
- 1600' NQ
- 3000' BQ 

* Hydraulic Reservoir Capacity    
- 21 Gallons, Oil cooled by Heat exchanger 

* Optional 
- Mud Mixer:        Hydraulic operated
- Water Pump:       20 GPM Hydraulic Operated
- Wire Line Winch:  3000' capacity

* Capacity Weights (aproximate) 
- Powerpack:                                          1500 lbs 
 can be split into two pices by removing 4 bolts:      500 lbs              
                                                      1000 lbs
- Drill Head:                                          120 lbs 
- Feed Frame With Foot Clamp:                          350 lbs

- Winch:                                                60 lbs